Mining

Mining Applications

Liquid Rubber products are extremely suitable for the highly corrosive environment and strict water and fire requirements within most mining facilities. The anti-corrosion, waterproofing, fire and chemical resistant characteristics make Liquid Rubber products perfect for applications ranging from metal protection to tank liners to floor coatings.

MetalSafe B-300 HighBuild S-200

Below ground piping and ventilation structures

To control corrosion on piping and ventilation equipment, Liquid Rubber MetalSafe B-300™ and Liquid Rubber HighBuild S-200™ provide excellent adhesion to metal are easy to apply by brush or airless spray system and easy to maintain. Both resist under-cutting, blistering and peeling, are workplace safe to apply and are cost effective. These protective coatings are equally effective for protecting new metal surfaces and stopping corrosion progression on existing rusted surfaces.

SealRoof A-100 SealRoof B-200

Above ground building roof waterproofing

Liquid Rubber SealRoof B-200™ applied as an ‘instant-setting’ fluid applied membrane provides cost effective waterproofing for all types of roof construction. Sprayed using a high volume – low pressure pump system, contractors can waterproof 500 m² of roof surface per day. The cured Liquid Rubber SealRoof B-200™ membrane resists damage from water, acid rain, sun’s ultraviolet radiation and wind. Liquid Rubber SealRoof A-100™ can be applied as a topcoat over SealRoof B-200™ where an energy efficient colour roof waterproofing membrane is desired.

SealRoof A-100 CreteSafe T-300 CreteSafe A-Primer

Process floor and warehouse

Applied over concrete flooring in process and warehouse facilities, Liquid Rubber SealRoof A-100™ provides a protective wear-resistant coating which resists acids found in mineral extraction processing. Applied over worn flooring Liquid Rubber SealRoof A-100™ fills cracks and damage areas, restoring a new floor look. Where greater traction is required, Liquid Rubber CreteSafe T-300™ containing a ‘grit’ additive, is recommended. Both coatings are salt and oil resistant. Liquid Rubber CreteSafe A-Primer™ is applied as a topcoat over either Liquid Rubber SealRoof A-100™ or CreteSafe T-300™ enhances resistance to staining and tracking.

SealRoof A-100 MetalSafe B-300

Process storage tanks

Liquid Rubber MetalSafe B-300™ easily adheres to any metal surface including low carbon steel, galvanized metal, and rusted metal. Liquid Rubber MetalSafe B-300™ creates seamless waterproof barrier on metal surfaces and is an excellent guard against corrosion: both preventing rust on new surfaces and preventing further corrosion on already affected areas. Liquid Rubber MetalSafe B-300™ is safe to apply is non-flammable and is water-based containing no solvents. Liquid Rubber MetalSafe B-300™ can be used as the finish coating or can be part of a two-part system using a topcoat of Liquid Rubber SealRoof A-100™ to provide a tough coloured surface.

MetalSafe B-300 HighBuild S-200

Structural metal

Spray or brush applied Liquid Rubber products protects ferrous metal support members from rust and corrosion by completely sealing the surface from air and water. Liquid Rubber MetalSafe B-300™ is resistant to ultraviolet radiation, water and airborne acids. A liquid applied coating, Liquid Rubber MetalSafe B-300™ and Liquid Rubber HighBuild S-200™ can seal the most complex structural geometries.

MetalSafe B-300 HighBuild S-200

Pipeline coatings

Liquid Rubber MetalSafe B-300™ a fast drying surface tolerant elastomeric coating that can be hand or spray applied to wire brushed rusty steel surfaces. Used for above and below ground pipelines, structural steel, bridges, tanks, and other steel surfaces. A solvent free two-component high performance coating, MetalSafe B-300™ is applied with conventional airless spray equipment. Liquid Rubber HighBuild S-200™ a high build single component cold applied liquid bituminous coating. Used for corrosion protection of buried pipe, flanges, valves and fittings and can be hand applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines.